A pulling bench for car body repair SIVER A is intended for quick repair of light and medium vehicle damage. SIVER A can be used in small body shop or as an additional work place in large body shops.

The system’s base consists from main frame equipped with anchoring system.
System is equipped with 10 ton corner pulling device.



Thanks to swivel wheels, the pulling bench can be easily moved on the hard coat so that you can use the bench as a trolley to transfer the vehicle inside the shop. The pulling bench does not require much space for storage

Pulling devices

Lever type pulling devices
2 swivel wheels and a handle for easy transfer

Siver-A hydraulic cylinder

Equipped with a 10 t hydraulic cylinder

Can be locked at a desired angle horizontally in 10 positions with the help of a special retainer.
Can rotate horizontally relative to the frame.

6 points to attach pulling devices

Anchoring clamps


One nut for quick and easy securing

Vehicle installation on the pulling bench

For installation, additional lifting devices such as several mobile hydraulic jacks or a two-tower lift are required.

Standard set of accessories for pulling bench:

3 clamps, latch chain / chain clamp, metal box.

Equipment has all necessary EU and RF certificates.


Platform length (m) 1,9
Platform width (m) 1,5
Working space requirements (m) 5 х 4,5
Height with Power devices (m) 1,6
Weight (with 2 power devices, kg) 450
Lift capacity (kg) 2000
Hydraulics (t) 10


Frame assembly 1 pc. 1 pc.
Pulling device 1 pc. 2 pcs.
Hydraulic cylinder 1 pc. 2 pcs.
Anchoring clamps 4 pcs. 4 pcs.
Accessory set: 1. Metal box - 1 pc.
2. Chain 8Р107 – 1 pc.
3. Chain link C903 – 1 pc.
4. Clamp C101 – 1 pc.
5. Clamp С102NN – 1 pc.
6. Clamp С302 – 1 pc.
1. Metal box - 1 pc.
2. Chain 8Р107 – 2 pcs.
3. Chain link C903 – 2 pc.
4. Clamp C101 – 1 pc.
5. Clamp С102NN – 1 pc.
6. Clamp С302 – 1 pc.

Shipping specifications:

Pulling bench is shipped in four packages:
SIVER A – shipping package SIVER_A_sill_clamps_s.png SIVER accessory set
Frame, pulling devices
4 anchoring clamps
SIVER STANDARD accessory set
1 (2) hydraulic cylinder(s)
Shipping package:
  • wooden pallet
  • metal tiedown
Shipping package:
  • cardboard box
Shipping package:
  • metal box
Shipping package:
  • cardboard box
  • Length: 1900 mm
  • Width: 1450 mm
  • Height: 300 mm
  • Weight: kg
  • Length: mm
  • Width: mm
  • Height: mm
  • Weight: 35 kg
  • Length: mm
  • Width: mm
  • Height: mm
  • Weight: kg

Producer reserves the right to make changes in design and set of products without prior notice!