Pulling system for trucks SIVER T

Superiority

Description

SIVER T is the floor-type frame repair system system for trucks and semi-trailers.

Floor-mounted frame components

The SIVER frame straightening system is based on the use of I-beams cast flush with the workshop floor.

Straightening work is to be done without ramps and the workshop can be used for other purposes. SIVER horizontal power devices and supports, vertical jacks, anchor rollers, floor attachment etc. can be anchored to these floor beams.

Frame size - 5.7 x 18 m (it is possible to do the frame with your custom sizes).

Frame repair in horizontal plane

To correct the geometry of the frame in the horizontal plane a horizontal power devices and supports are used. A triangles allow you to adjust the height of the pulling direction.

Horizontal puller

Convenient wheels to move
Dismountable handle
20 tons press capacity
350 mm stroke
Step of installation of power stops - 80 mm
Set of anchors

Horizontal support

Convenient wheels to move
Dismountable handle
Step of installation of power stops - 80 mm
Set of anchors

Set of aluminum power triangles with locks

Large triangl
Small triangl
Extensions
Bolts with nuts
Pins

Frame repair in vertical plane

To correct the geometry of the frame in the vertical plane a vertical power devices (jacks) are used. It locks the frame by means of chains and anchors rollers.

Vertical jack

Quick and easy movement with spring loaded wheels
Easy height adjustment with gas spring
Additional fixing of the rod when working without connecting to the hydraulic system
20 tons hydraulic cylinder
Minimum height - 500 mm
Maximum height - 1250 mm
Height adjustment step - 50 mm
Stroke - 350 mm

Down-pull attachment and chains

Used to fix the truck frame to the rail system, and to change the direction of straightening.
Large anchor roller
Small anchor roller
10m 4m chain with hook and clamp
20m 4m chain with hook and clamp